Docsity
Docsity

Prepare-se para as provas
Prepare-se para as provas

Estude fácil! Tem muito documento disponível na Docsity


Ganhe pontos para baixar
Ganhe pontos para baixar

Ganhe pontos ajudando outros esrudantes ou compre um plano Premium


Guias e Dicas
Guias e Dicas

samsung tv 245gwerda, Esquemas de Informática

documentação da tv samsung 245gwerda

Tipologia: Esquemas

2023

Compartilhado em 05/06/2025

mizael-teixeira-1
mizael-teixeira-1 🇧🇷

1 documento

1 / 90

Toggle sidebar

Esta página não é visível na pré-visualização

Não perca as partes importantes!

bg1
SERVICE
Manual
DIGITAL HOME THEATER SYSTEM
Refer to the service manual in the GSPN (see the rear cover) for the more information.
CONTENTS
1. Precaution
2. Product Specification
3. Disassembly & Reassembly
4. Troubleshooting
5. Exploded View & Part List
6. PCB Diagram
7. Schematic Diagram
DIGITAL HOME
THEATER SYSTEM
Model Name : HT-Z210
Model Code : HT-Z210T/XAH
Speaker HT-Z210
Front PS-FZ210
Center PS-CZ210
Rear PS-RZ210
Subwoofer PS-WZ210
HT-Z210
pf3
pf4
pf5
pf8
pf9
pfa
pfd
pfe
pff
pf12
pf13
pf14
pf15
pf16
pf17
pf18
pf19
pf1a
pf1b
pf1c
pf1d
pf1e
pf1f
pf20
pf21
pf22
pf23
pf24
pf25
pf26
pf27
pf28
pf29
pf2a
pf2b
pf2c
pf2d
pf2e
pf2f
pf30
pf31
pf32
pf33
pf34
pf35
pf36
pf37
pf38
pf39
pf3a
pf3b
pf3c
pf3d
pf3e
pf3f
pf40
pf41
pf42
pf43
pf44
pf45
pf46
pf47
pf48
pf49
pf4a
pf4b
pf4c
pf4d
pf4e
pf4f
pf50
pf51
pf52
pf53
pf54
pf55
pf56
pf57
pf58
pf59
pf5a

Pré-visualização parcial do texto

Baixe samsung tv 245gwerda e outras Esquemas em PDF para Informática, somente na Docsity!

SERVICE

Manual

DIGITAL HOME THEATER SYSTEM

Refer to the service manual in the GSPN (see the rear cover) for the more information.

CONTENTS

**1. Precaution

  1. Product Specification
  2. Disassembly & Reassembly
  3. Troubleshooting
  4. Exploded View & Part List
  5. PCB Diagram
  6. Schematic Diagram**

DIGITAL HOME

THEATER SYSTEM

Model Name : HT-Z

Model Code : HT-Z210T/XAH

Speaker HT-Z Front PS-FZ Center PS-CZ Rear PS-RZ Subwoofer PS-WZ

HT-Z

This Service Manual is a property of Samsung Electronics Co.,Ltd. Any unauthorized use of Manual can be punished under applicable International and/or domestic law.

GSPN (Global Service Partner Network)

Area Web Site

North America service.samsungportal.com

Latin America latin.samsungportal.com

CIS cis.samsungportal.com

Europe europe.samsungportal.com

China china.samsungportal.com

Asia asia.samsungportal.com

Mideast & Africa mea.samsungportal.com

© Samsung Electronics Co.,Ltd. Mar. 2008 Printed in Korea

Contents

7-7 ANALOG 7-

7-8 HDMI 7-

  • 1-1 Safety Precautions 1- 1. Precaution
  • 1-2 Servicing Precautions ......................................................................................1-
  • 1-3 Precautions for Electrostatically Sensitive Devices (ESDs) .............................1-
  • 2-1 Product Feature 2- 2. Product Specification
  • 2-2 Specifications 2-
  • 2-3 Specifications Analysis .....................................................................................2-
  • 2-4 Accessories 2-
  • 3-1 Overall Disassembly & Reassembly ................................................................3- 3. Disassembly & Reassembly
  • 4-1 Checkpoints by Error Mode..............................................................................4- 4. Troubleshooting
  • 4-2 Measures to be taken when the Protection Circuit operates 4-
  • 4-3 Initialization & Upgrade Methods .....................................................................4-
  • 5-1 Exploded View 5- 5. Exploded View & Part List
  • 5-2 Speaker System 5-
  • 5-3 Electrical Part List 5-
  • 6-1 Wiring Diagram 6- 6. PCB Diagram
  • 6-2 FRONT PCB Top 6-
  • 6-3 FRONT PCB Bottom ........................................................................................6-
  • 6-4 AMP PCB Top 6-
  • 6-5 AMP PCB Bottom............................................................................................. 6-
  • 6-6 BLUETOOTH PCB Top ....................................................................................6-
  • 6-7 BLUETOOTH PCB Bottom ..............................................................................6-
  • 6-8 MAIN PCB Top 6-
  • 6-9 MAIN PCB Bottom 6-
  • 6-10 SMPS PCB Top 6-
  • 7-1 Overall Block Diagram .....................................................................................7- 7. Schematic Diagram
  • 7-2 FRONT 7-
  • 7-3 BLUETOOTH 7-
  • 7-4 AMP 7-
  • 7-5 MAIN 7-
  • 7-6 MICOM 7-
  • 7-7 ANALOG 7-
  • 7-8 HDMI 7-
  • 7-9 SMPS 7-

Samsung Electronics 1-

Precaution

1. Precaution

Follow these safety, servicing and ESD precautions to prevent damage and protect against potential hazards such as electrical shock and X-rays.

1-1 Safety Precautions

  1. Be sure that all of the built-in protective devices are replaced.
  2. When reinstalling the chassis and its assemblies, be sure to restore all protective devices, including control knobs and compartment covers.
  3. Make sure that there are no cabinet openings through which people--particularly children--might insert fingers and contact dangerous voltages. Such openings include the spacing between the picture tube and the cabinet mask, excessively wide cabinet ventilation slots, and improperly fitted back covers.
  4. Design Alteration Warning: Never alter or add to the mechanical or electrical design of the unit. Example: Do not add auxiliary audio or video connectors. Such alterations might create a safety hazard. Also, any design changes or additions will void the manufacturer’s warranty.
  5. Leakage Current Hot Check (Fig. 1-1): Warning: Do not use an isolation transformer during this test. Use a leakage-current tester or a metering system that complies with American National Standards Institute (ANSI C101.1, Leakage Current for Appliances), and Underwriters Laboratories (UL Publication UL1410, 59.7).

With the unit completely reassembled, plug the AC line cord directly into a 120V AC outlet. With the unit’s AC switch first in the ON position and then OFF, measure the current between a known earth ground (metal water pipe, etc.) and all exposed metal parts. Examples: Handle brackets, metal cabinets, screwheads and control shafts. The current measured should not exceed 0. milliamp. Reverse the powerplug prongs in the AC outlet and repeat.

  1. Insulation Resistance Cold Check: (1) With the unit’s AC plug disconnected from the AC source, connect an electrical jumper across the two AC prongs. (2) Set the power switch to ON. (3) Measure the resistance between the shorted AC plug and any exposed metallic parts. Example: Screwheads, antenna, control shafts or handle brackets.

If any of the exposed metallic parts has a return path to the chassis, the measured resistance should be between 1 and 5.2 megohms. If there is no return path, the measured resistance should be “infinite.” If the resistance is outside these limits, a shock hazard might exist. See Fig. 1-

DEVICE UNDER TEST

LEAKAGE CURRENT TESTER TEST ALL EXPOSED METAL SURFACES 2-WIRE CORD ALSO TEST WITH PLUG REVERSED (USING AC ADAPTER PLUG AS REQUIRED)

EARTH GROUND

(READING SHOULD NOT BE ABOVE 0.5mA)

<Fig. 1-1 AC Leakage Test>

Antenna Terminal

ohm

<Fig. 1-2 Insulation Resistance Test>

Exposed Metal Part

Ohmmeter

Samsung Electronics 1-

Precaution

1-2 Servicing Precautions

  1. Servicing precautions are printed on the cabinet. Follow them.
  2. Always unplug the unit’s AC power cord from the AC power source before attempting to: (a) Remove or reinstall any component or assembly, (b) Disconnect an electrical plug or connector, (c) Connect a test component in parallel with an electrolytic capacitor.
  3. Some components are raised above the printed circuit board for safety. An insulation tube or tape is sometimes used. The internal wiring may be clamped to prevent contact with thermally hot components. Reinstall all such elements to their original position.
  4. After servicing, always check that the screws, components and wiring have been correctly reinstalled. Make sure that the portion around the serviced part has not been damaged.
  5. Check the insulation between the blades of the AC plug and accessible conductive parts (examples: metal panels, input terminals and earphone jacks).
  6. Insulation Checking Procedure: Disconnect the power cord from the AC source and turn the power switch ON. Connect an insulation resistance meter (500V) to the blades of the AC plug.

The insulation resistance between each blade of the AC plug and accessible conductive parts (see above) should be greater than 1 megohm.

  1. Never defeat any of the B+ voltage interlocks. Do not apply AC power to the unit (or any of its assemblies) unless all solid-state heat sinks are correctly installed.
  2. Always connect a test instrument’s ground lead to the instrument chassis ground before connecting the positive lead; always remove the instrument’s ground lead last.

First read the “Safety Precautions” section of this manual. If some unforeseen circumstance creates a conflict between the servicing and safety precautions, always follow the safety precautions.

1-4 Samsung Electronics

Precaution

1-3 Precautions for Electrostatically Sensitive Devices (ESDs)

  1. Some semiconductor (“solid state”) devices are easily damaged by static electricity. Such components are called Electrostatically Sensitive Devices (ESDs). Examples include integrated circuits and some field-effect transistors. The following techniques will reduce the occurrence of component damage caused by static electricity.
  2. Immediately before handling any semiconductor components or assemblies, drain the electrostatic charge from your body by touching a known earth ground. Alternatively, wear a discharging wrist-strap device. (Be sure to remove it prior to applying power--this is an electric shock precaution.)
  3. After removing an ESD-equipped assembly, place it on a conductive surface such as aluminum foil to prevent accumulation of electrostatic charge.
  4. Do not use freon-propelled chemicals. These can generate electrical charges that damage ESDs.
  5. Use only a grounded-tip soldering iron when soldering or unsoldering ESDs.
  6. Use only an anti-static solder removal device. Many solder removal devices are not rated as “anti-static” (these can accumulate sufficient electrical charge to damage ESDs).
  7. Do not remove a replacement ESD from its protective package until you are ready to install it. Most replacement ESDs are packaged with leads that are electrically shorted together by conductive foam, aluminum foil or other conductive materials.
  8. Immediately before removing the protective material from the leads of a replacement ESD, touch the protective material to the chassis or circuit assembly into which the device will be installed.
  9. Minimize body motions when handing unpackaged replacement ESDs. Motions such as brushing clothes together, or lifting a foot from a carpeted floor can generate enough static electricity to damage an ESD.

2-2 Samsung Electronics

Product Specification

2-2 Specifications

 Basic Specification

Model Name HT-Z

General

Power Requirements AC 220V, 50Hz Power Consumption 80 W Weight 3.5 kg Dimensions 430 (W) x 65 (H) x 352 (D) mm Operating Temperature Range +5°C ~ +35°C Operating Humidity Range 10 % to 75 %

Disc

DVD (Digital Versatile Disc)

Reading Speed: 3.49 ~ 4.06 m/sec. Approx. Play Time (Single Sided, Single Layer Disc): 135 min.

CD: 12 cm (COMPACT DISC)

Reading Speed: 4.8 ~ 5.6 m/sec. Maximum Play Time: 74 min.

CD: 8cm (COMPACT DISC)

Reading Speed: 4.8 ~ 5.6 m/sec. Maximum Play Time: 20 min.

Video Output

Composite Video

576i 1 channel: 1.0 Vp-p (75 Ω load)

Component Video

576i/480i Y: 1.0 Vp-p (75 load) Pr: 0.70 Vp-p (75 Ω load) Pb: 0.70 Vp-p (75 Ω load) Video/ Audio

HDMI 1080p, 1080i, 720p, 480p

Amplifier

Front speaker output 133W x 2 (3Ω) Center speaker output 133W (3Ω) Rear speaker output 133W x 2 (3Ω) Subwoofer speaker output 133W (3Ω) Frequency range 20Hz ~ 20KHz S/N Ratio 70dB Channel separation 60dB Input sensitivity (AUX) 400mV

Samsung Electronics 2-

Product Specification

 Speaker Specification

Speaker

Speaker system

5.1ch speaker system Front/Rear, Center Subwoofer Impedance 3Ω 3Ω Frequency range 140Hz ~ 20KHz 45Hz ~ 160Hz Output sound pressure level 86dB/W/M 86dB/W/M Rated input 133W 133W Maximum input 266W 266W

Dimensions (W x H x D)

Front/Rear: 90 x 118 x 90 mm Center: 250 x 91 x 90 mm Subwoofer: 180 x 320 x 380 mm

Weights

Front: 0.5 kg Center: 0.6 kg Rear: 0.4 kg Subwoofer : 4.5 kg

Samsung Electronics 2-

Product Specification

Model Name HT-Z210^ HT-TX

Photo

Video Inputs

Component X X Composite X X S-Video X X HDMI In X X

Video Outputs

Component (^)   Composite   HDMI Out  (1080P)  (1080P) S-Video X X SCART Out X X

Audio in/out

In AUX1 AUX Line In AUX2 AUX Multi ch Out X X Out X X Optical jack

In (Digital In) (^)  (1)  (2) Out X X Coaxial jack In^ X^ X Out X X i-Link X X Headphone/ MIC Jack

Headphone Jack (3.5Φ) (^)  (*1) X 2 MIC Jack (6.5Φ)   (Wireless MIC, CIS Only)

Tuner

FM   RDS X (^)  (EU Only) AM X X Preset Memory 15 15 Remote Key Universal Key (MBR)^ 57 Key^ 60 Key Dual Voltage HIGH, LOW, DUAL Voltage HIGH, LOW, DUAL Voltage

Speaker

Type (Sat/Tallboy) Satellite Tallboy Stand (^)   Impedance (Sat/Woofer) 3Ω/3Ω 3Ω/3Ω Active (Powered) S/W X X Net Weight(Kg) Set^5

 : application, X: non-application

2-6 Samsung Electronics

Product Specification

2-4 Accessories

2-4-1 Supplied Accessories

Accessories Item Item code Remark

Remote Control Batteries

AH59-01907B

Samsung Service center

HDMI Cable AH39-00721A

Video Cable AH39-40001V

FM Antenna AH42-00021A

Owner’s Instructions AH68-02055L

Cloth Clean AH81-02286C

3-2 Samsung Electronics

Disassembly & Reassembly

No. Part Name Description Description Photo

2 MECHA 1) Remove the mecha. Remove the 4 screws and wire. : TAP TITE SCREW BH 3*25 SILVER

3 CABINET

FRONT

  1. Remove the wires connected to the cabinet front.

In case of pulling up the PCB cable, it is easier to pull up when pressing the grip.

  1. Lift and pull out the cabinet front.

4 PCB 1) Remove the wires between PCBs.

In case of pulling up the PCB cable, it is easier to pull up when pressing the grip.

  1. Remove the 8 screws on the PCBs. : TAP TITE SCREW BH 3*6 SILVER

Samsung Electronics 3-

Disassembly & Reassembly

No. Part Name Description Description Photo

5 CABINET- BOTTOM REAR

  1. Remove the remaining 5 screws in the rear. : TAP TITE SCREW BH 3*10 BLACK

6 Set 1) Picture of a disassembled product.

Samsung Electronics 4-

Troubleshooting

4. Troubleshooting

4-1 Checkpoints by Error Mode ................................................................4-

4-2 Measures to be taken when the Protection Circuit operates ...........4-

4-3 Initialization & Upgrade Methods........................................................4-

4-2 Samsung Electronics

Troubleshooting

4-1 Checkpoints by Error Mode

4-1-1 Power Failure

UIC1 Main PCB; pin 14, 40, 55, 89 5V?

Yes

Yes

Check for POWER-SENSE (5V) at Main PCB : pin 22 of UIC1, 5V?

POWER PCB (SMPS) C73 (+) CHECK → 5V?

Check NORMAL VOLTAGE at SMPS PCB : D

Replace CON3 wire

Check pattern from MCON to pin 22 of UIC

Check for circuit at SMPS PCB; ICM01, Fuse (F1), D81, T1, T

Replace D51. Check Resistance from GND to pin 22 of MICOM (UIC1). If short (0 ohm), Replace MICOM (UIC1)

No

No

Yes

No

Yes

No

The power does not turn on.

When POWER ON for Front PCB, Check for HIGH voltage (5V) at UIC2; pin 13, 43

Replace the VFD DRIVER IC (ZIC1).

No

Yes

A