Programmable Automation Controllers
Features
ADAM-6541 Series Ethernet to FiberOptic Converters
Provides 1 x 10/100 Mbps Ethernet port with RJ45 connector
Provides 1 x 100 Mbps multi-mode fiber optic port
Supports full/half duplex flow control and internal jumper for setting
Supports store and forward transmission
Supports auto-negotiation
Supports MDI/MDI-X auto crossover
Provides surge protection (EFT) 3,000 VDC for power line
Provides 4,000 VDC Ethernet ESD protection
Supports +10 ~ 30 VDC power input
Provides flexible mounting : DIN-rail, Panel Mounting, Piggy-back
Supports operating temperature from 0 ~ 60°C
Introduction
ADAM-6541 is designed to convert Ethernet networks to fiber networks. It does so by transparently converting Ethernet signals to optic signals. The advantages of fiber optics are wide
bandwidth, EMI immunity and long-distance transmission capability. Therefore, ADAM-6541 is an ideal solution for “fiber to building” applications at central offices or local sites.
ADAM-6541 supports MDI/MDIX auto detection, so you don’t need to use crossover wires. It also includes a switch controller that can sense the transmission speed (10/100 Mbps)
automatically.Both the Ethernet port and the fiber port have memory buffers that support store-and-forward mechanisms. This assures data can be transmitted properly.
ADAM-6541 is extremely compact and can be mounted in three different ways: DIN-rail, Wall and Stack. ADAM-6541 can work normally from 0 ~ 60°C and accepts a wide voltage
range from +10 ~ 30 VDC. Besides, it also provides 3,000 VDC surge (EFT) protection against over-voltage, so it is suitable for harsh operating environments.
Specifications
Communications
Standard IEEE 802.3, 802.3u, 802.3x
LAN 10/100Base-TX, 100Base-FX
Transmission Distance
Ethernet : Up to 100 m
Fiber: Multi-mode : Up to 2 km
Single-mode : Up to 20 km
Transmission Speed Up to 100 Mbps
Interface
Connectors 1 x RJ-45
1 x SC type fiber connector (ADAM-6541) or 1 x ST
type fiber connector (ADAM-6541/ST)
2-pin removable screw terminal (power)
LED Indicators ADAM-6541, ADAM-6541/ST : Power, Full/Link
(100BASE-FX), 100/10M (Ethernet)
Power
Power Consumption ADAM-6541, ADAM-6541/ST : Max. 3W
Power Input 1 x Unregulated 10 ~ 30 VDC
Mechanism
Dimensions (W x H x D) 70 x 112 x 27 mm
Enclosure IP30, ABS+PC with solid mounting kits
Mounting DIN 35 rail, Wall, Stack
Protection
ESD (Ethernet) 4,000 VDC
Isolation (Ethernet) 1,500 Vrms
Surge (EFT for power) 3,000 VDC
Date updated: 2-Mar-2015
All product specifications are subject to change without notice
Environment
Operating Temperature 0 ~ 60°C (32 ~ 140°F)
Stack: 0 ~ 55°C (32 ~ 131°F)
Storage Temperature - 10 ~ 70°C (-14 ~ 158°F)
Operating Humidity 20 ~ 95% (non-condensing)
Storage Humidity 0 ~ 95% (non-condensing)
MTBF 550,000 hrs
Certification
Safety UL 60950-1, CAN/CSA-C22.2 No.60950
EMC U.S.A.: FCC Part 15 CISPR 22
EU: EN55011, EN61000-6-4
EN55022 Class A,
EN61000-3-2/3
EN55024,
IEC61000-4-2/3/4/5/6/8/11
EN61000-6-2
Ordering Information
ADAM-6541 Ethernet to Multi-mode SC Type Fiber Optic Converter
ADAM-6541/ST Ethernet to Multi-mode ST Type Fiber Optic Converter
ADAM-6541/ST