friabilizador de mesa, Esquemas y mapas conceptuales de Tecnología Industrial

SPECIFICATIONS

Thermocouple: Type-K

Range: –328 to 2498 °F / –200 to 1370 °C

Resolution: 0.1° from -328 to 990°F/-200 to 640°C

1° from 990 to 2498°F / 640 to 1370°C

Accuracy: ±1° C

TEMPERATURE MEASUREMENT

1. Insert the probe plug into the socket at the top

of the meter. The plug and sockets are keyed

be measured and read the temperature on

the display.

5. Press the button again to turn the meter

off. To conserve battery life, always turn off the

meter when not in use.

After 20 minutes, the meter will automatically turn

off to preserve battery life. To disable this feature,

see the “Automatic Shutoff Disable/Enable”

section.

DATA HOLD FUNCTION

to return to current temperature display (“HOLD”

will no longer appear on the display).

MEMORY RECORD MODE

Press the button to activate the Record mode

and start the timer (“REC” will appear on the display).

While in the Record mode, the meter will record

the minimum and maximum temperature readings

achieved along with the relative time (count-up time)

that the minimum and maximum were achieved.

Note: While in this mode, pressing the button will have no

affect and will not change the display.

Note: If the Automatic Shutoff feature has not been

on the display).

The minimum and maximum temperature recordings

are automatically cleared once the Record mode

has been exited.

MEMORY RECALL

1. While in the Record mode, press the

button to display the maximum temperature and

relative time (count-up time) that the maximum

temperature was achieved. (“MAX” will appear

on the display.)

time (count-up time).

AUTOMATIC SHUTOFF DISABLE

The Automatic Shutoff feature will turn the meter

off after 20 minutes to preserve battery life. This

feature is automatically enabled each time the

meter is powered on, regardless of whether the

feature was disabled previously.

To disable the Automatic Shutoff feature:

While the meter is turned off, press and hold the

button, then press and release the

With the Automatic Shutoff feature disabled,

the meter will remain on until the button is

pressed, or until the battery is fully drained.

RELATIVE MEASUREMENT MODE

Press and hold the button for 3 seconds to

activate the relative measurement mode (“REL” will

appear on the display. When the relative measure-

ment mode is activated, the display will show the

“relative zero” based on the temperature that was

being measured when the mode was entered. The

display will then indicate the temperature difference

from the “relative zero” value.

2.5 °C. If the temperature falls to 20.0 °C, the

display will show -5.0 °C.

Note: While in this mode, pressing the button will have no

affect and will not change the display.

To exit the relative measurement mode, press

and release the button (“REL” will no longer

appear on the display.)

MEMORY RECORD - RELATIVE MEASUREMENT

While in the relative measurement mode, press the

button to activate the Record mode and start

maximum were achieved.

Note: If the Automatic Shutoff feature has not been

disabled, the meter will turn off automatically after

20 minutes. For long term monitoring, disable the

Automatic Shutoff feature. (See the “Automatic

Shutoff Disable/Enable” section.).

Press and hold the button for 3 seconds to

exit the Record mode (“REC” will no longer appear

on the display).

The minimum and maximum temperature recordings

relative time (count-up time) that the maximum

temperature difference was achieved. (“MAX”

will appear on the display.)

2. Press the button a second time to

display the minimum temperature difference and

relative time (count-up time) that the minimum

temperature difference was achieved. (“MIN” will

appear on the display.)

3. Press the button a third time to return to

the current relative temperature display and

To stop timing and turn off the count-up timer,

press the button a second time.

Press the button to turn on the display

backlight when in dim or dark conditions. The

light will automatically turn of after 30 seconds to

preserve battery life.

The meter is supplied with a Type-K thermocouple

but is also able to accept Type-J and Type-T