Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

BICSI Installer1 Exam Preparation: Questions and Answers, Exams of Information and Communications Technology (ICT)

A comprehensive set of questions and answers for the bicsi installer1 exam. It covers a wide range of topics related to telecommunications cabling, including cable types, installation practices, testing procedures, and safety regulations. Designed to help individuals prepare for the bicsi installer1 certification exam and gain a deeper understanding of telecommunications cabling principles.

Typology: Exams

2024/2025

Available from 03/27/2025

Andreas-best
Andreas-best 🇬🇧

726 documents

1 / 16

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
BICSI INSTALLER1 QUESTIONS WITH 100% CORRECT ANSWERS
"Which of the following refers to a set of rules issued by a governmental body at the state level
within the US? - CORRECT ANSWER Regulations"
"What is the specified performance level for category 6 cable? - CORRECT ANSWER 250MHz"
"Which type of optical fiber cable should be color coded with an Orange outer cable sheath? -
CORRECT ANSWER MM with a 100 um core diameter"
"Which of the following is the primary benefit of using wall-mounted racks and cabinets in place
of traditional equipment racks? - CORRECT ANSWER Takes up less space within the
equipment room"
"Which topology uses a linear configuration that places all network devices on one length of
cable? - CORRECT ANSWER Bus"
"Which of the TWO organizations jointly oversee the worldwide standardization of
telecommunications cabling? - CORRECT ANSWER ISO & IEC"
"Which of the following is a building-serving space that houses large pieces of common active
equipment? - CORRECT ANSWER ER"
"Which phase of testing includes documenting the test results? - CORRECT ANSWER Phase 3"
"Which of the following is designed to provide protection from harmful chemicals? - CORRECT
ANSWER Rubber Gloves"
"Which of the following connector styles is presently used within optical fiber cabling systems
(i.e., it is NOT a legacy connector)? - CORRECT ANSWER Small form factor (SFF)"
"Which of the following components is used to bond the electrical system's grounding electrode
system to the PBB? - CORRECT ANSWER TBC"
"What is the characteristic impedance of Series-6 coaxial cable? - CORRECT ANSWER 75
ohms"
1
pf3
pf4
pf5
pf8
pf9
pfa
pfd
pfe
pff

Partial preview of the text

Download BICSI Installer1 Exam Preparation: Questions and Answers and more Exams Information and Communications Technology (ICT) in PDF only on Docsity!

BICSI INSTALLER1 QUESTIONS WITH 100% CORRECT ANSWERS

"Which of the following refers to a set of rules issued by a governmental body at the state level

within the US? - CORRECT ANSWER Regulations"

"What is the specified performance level for category 6 cable? - CORRECT ANSWER 250MHz"

"Which type of optical fiber cable should be color coded with an Orange outer cable sheath? -

CORRECT ANSWER MM with a 100 um core diameter"

"Which of the following is the primary benefit of using wall-mounted racks and cabinets in place

of traditional equipment racks? - CORRECT ANSWER Takes up less space within the

equipment room" "Which topology uses a linear configuration that places all network devices on one length of

cable? - CORRECT ANSWER Bus"

"Which of the TWO organizations jointly oversee the worldwide standardization of

telecommunications cabling? - CORRECT ANSWER ISO & IEC"

"Which of the following is a building-serving space that houses large pieces of common active

equipment? - CORRECT ANSWER ER"

"Which phase of testing includes documenting the test results? - CORRECT ANSWER Phase 3"

"Which of the following is designed to provide protection from harmful chemicals? - CORRECT

ANSWER Rubber Gloves"

"Which of the following connector styles is presently used within optical fiber cabling systems

(i.e., it is NOT a legacy connector)? - CORRECT ANSWER Small form factor (SFF)"

"Which of the following components is used to bond the electrical system's grounding electrode

system to the PBB? - CORRECT ANSWER TBC"

"What is the characteristic impedance of Series-6 coaxial cable? - CORRECT ANSWER 75

ohms"

"Which of the following makes the biggest impression on a customer when you are

communicating via email? - CORRECT ANSWER Choice of words"

"Which of the following attachment methods does BICSI recommend for attaching coaxial

connectors to coaxial cable? - CORRECT ANSWER Compression"

"Electrical power (P) is measured in ___________? - CORRECT ANSWER Watts"

"How much cable slack should be left in the work area after termination? - CORRECT ANSWER

1m (3.3')"

"Which of the following types of cable produces very little smoke when burned? - CORRECT

ANSWER LSZH"

"How much sheath of the cable needs to be removed in order to properly terminate an 8P8C? -

CORRECT ANSWER 12.7mm (0.5")"

"A category 8 cable is terminated into category 6A outlets with category 5e patch cords. What is

the maximum supported performance level? - CORRECT ANSWER Category 5e"

"Which of the following tools is a low-cost cable verifier that can be used to test for opens, shorts,

crossed pairs, and miswires in 4- pair cables? - CORRECT ANSWER Wire map tester"

"Which of the following quantifies the bandwidth of a cabling system in a frequency range of

interest? - CORRECT ANSWER Megahertz"

"Which of the following fire ratings refers to the time period that a fire-rated assembly can resist

flame passage? - CORRECT ANSWER F rating"

"Which of the following types of construction protects the optical fiber by supporting each strand

of glass with a buffer coating extruded over the base optical fiber's 250 um acrylate coating? -

CORRECT ANSWER Tight buffered"

"Which of the following markings indicates that the cable is designed for use in a plenum space?

CORRECT ANSWER CMP"

"A grey backboard should be used to identify _____ backbone cable? - CORRECT ANSWER

Second-level" "Which of the following may provide a demarcation point between the service provider and the

customer premises cabling? - CORRECT ANSWER Entrance facility"

"What is the size of a rack-mounted unit (RMU)? - CORRECT ANSWER 45 mm (1.75")"

"Which type of cabling is installed between a main cross connect and a horizontal cross connect?

CORRECT ANSWER First-level backbone"

"If the situation requires, a conduit should be terminated _______ the plywood backboard? -

CORRECT ANSWER Through"

"Light pulses in optical fiber cables are subjected to a loss in power as the light pulses travel along

the optical fiber. Which of the following terms is used to describe this phenomenon? - CORRECT

ANSWER Attenuation"

"Which of the following fire ratings refers to the time period that the unexposed surface of a

firestop assembly does not exceed 180 degrees C (325 degrees F) above its initial temperature? -

CORRECT ANSWER FT rating"

"Which of the following combinations is used to identify the tip conductors in Pair 1 of a 4-pair

cable? - CORRECT ANSWER White-Blue"

"What type of coaxial cable is used for video backbone distribution? - CORRECT ANSWER

Series 11" "A third 90-degree bend may be permitted in a conduit run if one of the bends is located within

____ of the cable feed end? - CORRECT ANSWER 300 mm (12")"

"Which pair of a 100-ohm balanced twisted pair patch cable has a white-brown tip and a brown-

white ring? - CORRECT ANSWER Pair 4"

"Which of the following is a measure of the amount of information being transported over

media? - CORRECT ANSWER Megabits"

"What is the specified performance level for Category 8 cable? - CORRECT ANSWER 2000

MHz"

"What is the maximum pull force for four-strand optical fiber? - CORRECT ANSWER 222N (

lbf)" "Which of the following should be used to prevent the cable from twisting during a horizontal

backbone pull? - CORRECT ANSWER Swivel"

"Which of the following is used to measure the length of a 4-pair cable? - CORRECT ANSWER

Time domain reflectometer (TDR)"

"What is the maximum permissible amount of untwisting for category 5e cable and higher? -

CORRECT ANSWER 12.7 mm (0.5")"

"Which of the following is the first step of the emergency rescue process? - CORRECT ANSWER

Survey the scene"

"What is the minimum inside bend radius for balanced twisted pair (4 pair) cable? - CORRECT

ANSWER 4 times the outside cable diameter"

"How far should the top of a ladder extend above the roofline? - CORRECT ANSWER 0.9 m (3')"

"What grade of plywood is recommended for use with ICT systems? - CORRECT ANSWER A/C"

"What is the maximum number of work areas that a CP should serve? - CORRECT ANSWER 12"

"Which of the following tend to cause sheath damage during cable pulling? - CORRECT

ANSWER FMC/FMT"

"What is the required physical topology for a SCS? - CORRECT ANSWER Star"

"How long does it take someone to form a first impression? - CORRECT ANSWER 10 to 15

seconds"

"Which is a keyed, contact, moderate loss connector in present use today that is pull & wiggle-

proof? - CORRECT ANSWER Straight Tip (ST)"

"What is the markings for non-conductive optical fiber riser cable? - CORRECT ANSWER

OFNR"

ANSI/ TIA 568.0 - CORRECT ANSWER Generic Telecommunications Cabling for Customer

Premesis"

"ANSI/ TIA 568.1 - CORRECT ANSWER Commercial Building Telecommunication Cabling

Standard"

"ANSI/ TIA 568.2 - CORRECT ANSWER Balanced Twisted-Pair Telecommunications Cabling and

Components Standard"

"ANSI/ TIA 568.4 - CORRECT ANSWER Broadband Coaxial Cabling and Components Standard"

"ANSI/ TIA 569 - CORRECT ANSWER Telecommunications Pathways and Spaces"

"ANSI/ TIA 570 - CORRECT ANSWER Residential Telecommunications Infrastructure Standard"

"ANSI/ TIA 606 - CORRECT ANSWER Administration Standards for Telecommunications

Infrastructure"

"ANSI/ TIA 607 - CORRECT ANSWER Generic Telecommunications Bonding and Grounding

(Earthing) for Customer Premise"

"What is the first step you should take to safely assist an injured person during an emergency? -

CORRECT ANSWER Survey the scene"

"What does OSHA stand for? - CORRECT ANSWER Occupational Safety and Health

Administration"

"When surveying a victim, what does ABC stand for? - CORRECT ANSWER Airway

Breathing Circulation"

"In the case of an accident, what are the 6 steps? - CORRECT ANSWER 1- survey the scene

2- notify someone 3- secure the area 4- primary survey (ABC) 5- contact EMS 6- secondary survey"

"Communication is what percent body language? - CORRECT ANSWER 55%"

"In AC, what is the total opposition of current flow called? - CORRECT ANSWER Impedance"

"How many backbone levels are allowed in a structured cabling system? - CORRECT ANSWER

"What is the most economical permanent entrance over the lifecycle of the building? -

CORRECT ANSWER Underground

(In conduit)" "What is the BICSI recommended width of a cable tray to be mounted on the same wall as

backboards? - CORRECT ANSWER 12 in"

"What are the two common widths that are available for equipment racks? - CORRECT

ANSWER 19" and 23""

"You should limit the installation of flexible metal conduit to_____________. - CORRECT

ANSWER 20 ft"

"Only a roll type cutter should be used on EMT

T or F - CORRECT ANSWER False"

"A hand bender can be used for conduits up to ___________ diameter. - CORRECT ANSWER 1

"What is the minimum recommended AWG for a GE? - CORRECT ANSWER 6 AWG"

M

"For every ____ degrees, attenuation increase ____% - CORRECT ANSWER 10 degrees

"NRTL - CORRECT ANSWER Nationally Recognized Testing Laboratory"

"F rating - CORRECT ANSWER Time period that the assembly resists flame passage"

"T rating - CORRECT ANSWER Time period the non-fire side does not exceed 325°F above

ambient"

"L rating - CORRECT ANSWER Air leakage rate that simulates smoke leakage"

"W rating - CORRECT ANSWER Does not allow water to leak"

"Non-mechanical firestop materials have three basic properties - CORRECT ANSWER

Intumescent Endothermic Ablative"

"Intumescent - CORRECT ANSWER Ability to expand"

"Endothermic - CORRECT ANSWER Ability to absorb heat"

"Ablative - CORRECT ANSWER Develops a hard char"

"The first step in testing copper cables - CORRECT ANSWER Visual inspection"

"Which is NOT a style of splice closure

Straight Butt Bridge

Branch - CORRECT ANSWER Bridge"

"Which splicing technique allows for maintenance, rearrangement and transfer of the conductors

- CORRECT ANSWER Foldback"

"Which service entrance has the lowest installation costs? - CORRECT ANSWER Aerial"

"Provides the cable - CORRECT ANSWER Access provider"

"Rides on the cable provided - CORRECT ANSWER Service provider"

"What is the minimum bend radius for conduits less than 2"? - CORRECT ANSWER ..."

"110 termination blocks come in increments of: - CORRECT ANSWER 50, 100, 300 and 900

pairs"

"The most common process for voice conversion is called __________________. - CORRECT

ANSWER Pulse Code Modulation

PCM"

"The POTS signal range is _______ to ________. - CORRECT ANSWER 300- 3400hz"

"PCM samples the analog voice signal __________ times per second to create a digital voice

channel of ____________bits per second - CORRECT ANSWER 8,

"The decibel is a _____________ function that allows large variations to be shown in small

increments. - CORRECT ANSWER Logarithmic"

"Which of the following PPE items MUST be worn at all times when you are working with or

handling OF? - CORRECT ANSWER Eye protection"

"Which of the following is used to equalize potential differences between the SBB on the same

floor? - CORRECT ANSWER BBC"

"Which type of optical fiber cable should be color coded with a RED outer cable sheath? -

CORRECT ANSWER Dispersion-shifted SM optical fiber"

"During a retrofit, an installation crew discovers old insulation that they think may contain asbestos, they cannot complete their work without disturbing the insulation. What is the best

course of action for the crew to take? - CORRECT ANSWER Stop work immediately"

"What is the maximum allowable horizontal cable length? - CORRECT ANSWER 90 m"

"Which of the following describes a nonmechanical firestop system that forms a hard char when

exposed to flame? - CORRECT ANSWER Ablative"

"Two truck drivers are communicating over a Citizens Band (CB) radio. Only one driver can send a

message at a time with this system. What type of transmission method is used in this example? -

CORRECT ANSWER Half-duplex"

"Which tool is required to pull backbone cable of significant weight? - CORRECT ANSWER

Tugger"

"What is the primary purpose of firestopping? - CORRECT ANSWER Reestablish the barrier's

fire rating"

"Cavity boxes should be at least _____ away from the wall, where possible. - CORRECT

ANSWER 100mm (4")"

"Which of the following is used to express system gain and loss? - CORRECT ANSWER Decibel"

"Which type of cabling is installed between a main cross-connect (campus distributor) and an

intermediate cross-connect (building distributor)? - CORRECT ANSWER First-level backbone"

"Which of the following terms describes the unwanted signal coupling from a disturbing pair of a

4-pair cable channel to a disturbed pair of another 4-pair channel? - CORRECT ANSWER AXT -

alien crosstalk"

"Which of the following steps should be performed first when an installer is pulling backbone

cable from the bottom up? - CORRECT ANSWER Verify the proper cable run"

"What is the primary purpose of an electrical grounding system? - CORRECT ANSWER

Enhance personnel safety and reduce the likelihood of a fire hazard" "The horizontal distance from the base of the ladder to the supporting wall should be ____

percent the working length of the ladder. - CORRECT ANSWER 25"

"Which of the following results from the different optical path lengths in a multimode fiber? -

CORRECT ANSWER Modal dispersion"

"You are terminating a category 3 cable. What is the maximum permissible amount of

untwisting? - CORRECT ANSWER 75 mm (3")"

"What is the minimum recommended height that should be used when mounting a plywood back

board in a telecommunication space? - CORRECT ANSWER AFF 200 mm (8")"

"Which of the following should be used to install plywood in a telecommunications room if the

edge of the board does NOT align with the wall studs? - CORRECT ANSWER Toggle bolts"

"Which of the refers to a rule or set of rules intended to endure safety during the installation and

use of materials, components, fixtures, systems, premises and related subjects? - CORRECT

ANSWER Code"

"Which of the following steps should be performed first when an installer is pulling optical fiber

cable? - CORRECT ANSWER Ensure the cable has been tested and accepted"

"What is the minimum inside bend radius for balanced twisted pair (multi-pair) cable? -

CORRECT ANSWER 10 times the outside cable diameter"

"Which of the following is a benefit of air-blown optical fiber cable? - CORRECT ANSWER It can

be recovered and reused"

"What is the primary purpose of the telecommunications bonding infrastructure? - CORRECT

ANSWER Equalize potentials between metallic surfaces and equipment within entrance

facilities" "Which of the following topologies is the recommended topology for distribution systems in

campus environments? - CORRECT ANSWER Hierarchical Star"

"What color termination field identifies "common equipment"? - CORRECT ANSWER Purple"

"Which of the following serves a limited space while supporting a small number of users? ER TE TC

TR - CORRECT ANSWER TE

3600sq ft"