【Specifications】
【Name】Ethylene oxide sterilizer
【Model】JM-H120
【Product form】Manual door vertical
【Heating method】Electric heating
【Power】3.0kVA
【Power supply】AC220V，50Hz
【Equipment size】（L×W×H）：795×615×1140mm
【Inner diameter size】L×W×H）：585×375×472mm
【Volume】120L
【Weight】147kg
【Temperature display】LCD touch screen
【Sterilization room material】304 anti-corrosion stainless steel
【Outer box material】Carbon steel (thickness 1.8mm) baking powder
【Temperature during sterilization】50℃
【Work pressure】-60kpa
【Maximum anti-stress value】-80kpa
【Humidity during sterilization】45%-75%
【Choose gas】Pure ethylene oxide gas
【Sterilization time】0-99 hours adjustable
【Vacuum speed】15 minutes to pump to -60kpa
【Air replacement】Automatic ventilation, cycle ventilation 5 times, once every 15 minutes
【Fully automatic control system 】One-click start to end, the whole process is automatically
completed
【Display state 】Display operating status, temperature, humidity, pressure, sterilization time,
residual gas treatment time, times, steam generator temperature.
【Printer 】Use a micro printer to print out the data every minute during the entire sterilization
process, which can be stored permanently.
【Humidity Sensor】The built-in humidity sensor automatically detects the humidity in the cavity.
【Pressure Sensor】The built-in pressure sensor automatically detects the pressure in the cavity.
【Temperature Sensor】The built-in temperature sensor automatically detects the temperature in the
cavity with an accurate range of 50℃±3℃.
【Vacuum system】Use an oil-free vacuum pump.
【Sealed door】Using 5052 high-quality aviation aluminum, thickness ≥15mm, pressure resistance
200Kpa.
【Humidification system】Pulse humidification under vacuum.
【Residual gas treatment device】The filtration rate of the filter for particle diameter ≥ 0.2μm is not
less than 99.5%.
