Find users

PSPICE Transient Analysis - Engineering Circuit Analysis - Lecture Slides

Slides, Electrical Circuit Analysis

Post: March 26th, 2013
Description
These are the Lecture Slides of Engineering Circuit Analysis which includes Units of Volts and Amps, Complex Number, Resistive Component, Series
These are the Lecture Slides of Engineering Circuit Analysis which includes Units of Volts and Amps, Complex Number, Resistive Component, Series
-
Embed this document

Report Report

Reason:

Send Message

Login or register to download this document!

If you are already registered, login otherwise Register , it just takes 1 minute!

Uploaded by:

abduu

abduu
Universityuni_20documents_40doc_answ
Embed this document
Get the App
Contents
PSPICE Transient Analysis • Circuit to Simulate  TextBook Fig. 7.25 • Place Vs, GND, R • Two New Parts – Switch – Capacitor • Now Install Cap Using – Draw – Get New Part… Docsity.com Get Cap Part • Place, Flip, Twist, and Set Value NOT Case Sensitive Docsity.com Get Switch Part Double Click Turn Off Accept Defaults Docsity.com Set Cap Initial Condition (IC) • Just as in MATLAB SimuLink, the Initial Condition MUST be Specified. • Set the CAP Initial Voltage vc(0−) = vc(0+) MUST Enter IC Value • PIN-Numbers and Current Directions – Current is ASSUMED to ENTER at Pin-1 within SPICE – To REVERSE a Current Direction use “Rotate” Twice to Affect a 180° Twist Docsity.com SET UP Transient Simulation Click Docsity.com PROBE Window • Simulate the Circuit Time-Based Graph Window • Simulating the Circuit AUTOmatically Opens the PROBE Window – See  Docsity.com Add TRACE to PROBE Graph Turn OFF Docsity.com Add SECOND Y-Axis ..

Docsity.com

Learning becomes social!

Authentication required

This feature is reserved for registered user

Register Login

Docsity.com

Learning becomes social!

Authentication required

Hi!
In order to freely download all the documents on Docsity, please register or login:

Register Login