THE MOST ON DOCSITY
Find users

Machining Steel - Design and Manufacturing Engineering - Lecture Notes

Lecture Notes, Design And Analysis Of Algorithms

Post: March 24th, 2013
Description
These are the Lecture Notes of Design and Manufacturing Engineering and its key important points are: Machining Steel, Face Turning, Machining Operations, Chamfering, Adequate Side, Cutting Edge, Tool Post, Tool Holder, Minimize Damage, Tool and Tool
These are the Lecture Notes of Design and Manufacturing Engineering and its key important points are: Machining Steel, Face Turning, Machining Operations, Chamfering, Adequate Side, Cutting Edge, Tool Post, Tool Holder, Minimize Damage, Tool and Tool
-
Embed this document

Report Report

Reason:

Send Message

Login or register to download this document!

If you are already registered, login otherwise Register , it just takes 1 minute!

Uploaded by:

dhyanesh

dhyanesh
Universityuni_100documents_40doc_answ
Embed this document
Get the App
Contents
“Machining Steel” A Lab in Two Parts Part A Equipment: Lathe w/ tool post Single point Triangular Carbide Cutter Positive Tool Holders Micrometer CR 1018 Steel Workpiece (1" (25.4 mm) diameter -- Center Drilled) During this laboratory the student team will produce the part “Adjuster Leg” shown on the attached sheets. The machining operations required will include longitudinal turning, "chamfering", and face turning (facing) during Part A. The cutting tool should be positioned with an adequate side cutting edge (lead) angle to allow free cutting operations, we will be using both right hand and left hand cutters to perform each operation. Note the tool’s positive rake angle and clearance angles. The chips as they are produced will slide over the rake face away from the work when properly mounted. Also, the tool post/tool holder is mounted so that any problems in the operation tend to eject the tool from the workpiece to minimize damage. After the tool is mounted, with tool tip ..

Docsity.com

Learning becomes social!

Authentication required

This feature is reserved for registered user

Register Login

Docsity.com

Learning becomes social!

Authentication required

Hi!
In order to freely download all the documents on Docsity, please register or login:

Register Login